Info

Linear Thermoplastic Elastomer Thermoplastic polyester elastomer (TPEE), also known as polyester rubber, is a type of block linear copolymer containing PBT polyester hard segment (crystalline phase, providing strength) and polyether soft segment (continuous segment). The rigidity, polarity and crystallinity of

What is PI plastic? Polyimide (PI for short) is one of the most heat-resistant and fire-resistant polymers currently available. Its low wear rate, ability to work without lubrication, and high pV rate make it an ideal material for high friction

ABS Plastic Acrylonitrile Butadiene Styrene (ABS) is an impact-resistant engineering thermoplastic. It is an amorphous polymer. It is made of three monomers: acrylonitrile, butadiene, and styrene. It is a preferred choice for structural applications due to its physical properties.  How

Polysulfone Plastic Polysulfone is a thermoplastic resin containing sulfone (-SO2-) and arylene in the main chain of the molecule. Its English name is Polysulfone (PSF or PSU for short). There are three types: ordinary bisphenol A PSF (commonly known as

Polyphenylene Oxide Polyphenylene ether is a high-strength engineering plastic developed in the 1960s. Its chemical name is poly-2,6-dimethyl-1,4-phenylene ether, referred to as PPO (Polyphenylene Oxide) or PPE (Polypheylene ether), also known as polyphenylene oxide or polyphenylene ether. Polyoxyxylene was made

Polybutylene Terephthalate Polybutylene terephthalate (PBT) is a translucent or opaque, crystalline thermoplastic polyester resin, also known as polytetramethylene terephthalate, which was first synthesized by German scientist P. Schlack in 1942. The production process of PBT resin is mainly divided into